GUTTER PROTECTION SYSTEMS

Gutter Guards

Gutter Covers

Aluminum Drop-In Cover

• Filters out leaves, pine needles and small debris
• Allows maximum water flow; up to 22 inches of rain per hour
• Green Constructed; made from 98% Recycled Aluminum
• Patent-Pending Raised Ridges and Multi-Angle Ports increase water flow and increases self-cleaning
• Fascia mounting strengthens the gutter system
• Ultra low profile lip attachment is invisible from the ground
• Drop-In design and Multiple adjustment angles accommodates all hangers, including hangers with screws and never interferes with roofing material
• Weather resistant; no corrosion
• Available in 5" or 6"

Installation

• Fast and Simple to Install
• No clips, hangers or brackets to install
• Lays flat inside the gutter
• Overlap tabs for quick mating of panels
• Attaches and secured to the gutter lip with zip screws
  
   

HEATED GUTTER COVERS

Improve your Gutter leaf covers’ performance during the winter months, and icicles will become a thing of the past. As with ANY leaf cover, snow build-up on the panel may lead to some icicle creation. Gutter Kings can install our self-regulating heat cable system to completely eliminate this issue. We securely attach one strand of heat cable to the top of the gutter panel, to prevent snow from accumulating and install a second strand in the bottom of the gutter and downspout. This second strand of heat cable keeps an open melt path to the ground for the melt water to flow. We can also retro fit the heat cable on most existing gutter cover systems.

Xtreme Guard Gutter Protection System

Xtreme Guard leaf filter is a stainless steel micro-mesh over expanded aluminum product that yields the optimum micron size (440) to prevent all debris from entering the gutter system. This product utilizes a .024" aluminum body and lip that is mechanically fastened over the mesh laminate, creating an exponentially stronger product, in both compression and tension. The embossed texture feature deters debris from "sticking" to the product by minimizing surface contact area, thus augmenting the debris shedding.

The front leg of the product screws to the front lip of the gutter and the back upward bend (fascia shield) allows it to be screwed directly to the fascia, creating a slight forward slope. This installation creates unprecedented "box girder" strength, making the gutter assembly, which is inherently weak by nature, a completely closed member. The micro-mesh technology ensures that leaves, twigs, pine needles, oak tassels, shingle grit and other small debris will never breach the system to migrate into the gutters. The mesh is strategically sized to allow passage of pollen and dust so it is washed through during rainfall. It may be necessary from time to time to clean or remove stubborn debris (inorganic & organic) from the mesh surface to maintain the proper performance.

As with all Xtreme gutter guard products, NO roof or shingle contact is required.